Filter
Top Products
187
Editing Songs
Measure, For (Edit Range)
Specifies the range of measures in which the MIDI channel will be
changed. If you set “For” to “ALL,” all measures will be specified.
Status
Selects the type of data for which you wish to change the MIDI
channel.
Value
ALL
NOTE
Polyphonic Aftertouch
Control Change
Program Change
Channel Aftertouch
Pitch Bend
Range Min, Range Max
If you have set the Status parameter to “NOTE,” “P.AFT,” “C.C,” or
“PROG,” you can specify the range of data. Set “Range Min” to the
lowest value of the range, and “Range Max” to the highest value of
the range.
To change the MIDI channel of all notes or polyphonic
aftertouch data, set “Range Min” to “C -1” and “Range Max” to
“G9.” To change the MIDI channel of C4, set “Range Min” and
“Range Max” to “C4.” To change C3 through C4,” set “Range
Min” to “C3” and “Range Max” to “C4.”
• To change the MIDI channel of all controller numbers, set
“Range Min” to “0” and “Range Max” to “127.” To change the
MIDI channel of all program numbers, set “Range Min” to “1”
and “Range Max” to “128.” To change number 4, set “Range
Min” and “Range Max” to “4.” To change numbers 3 through
14, set “Range Min” to “3” and “Range Max” to “14.”
Src Channel, Dst Channel (MIDI Channel)
Set Src Channel to the MIDI channel that you want to change, and
set Dst Channel to the MIDI channel to which it will be changed.
If you have selected ALL for the source MIDI channel, the sequencer
data of all MIDI channels will be combined into the destination MIDI
channel.
Value:
ALL, 1–16
It is not possible to select “ALL” for the destination MIDI
channel.
This function modifies the duration (time from note-on to note-off)
of notes within a specified area. Depending on the setting, you can
also create staccato or tenuto.
fig.19-018_50
For details on the settings, refer to
“Basic Operation for Track
Editing”
(p. 180)
Track / Pattern (Source Track)
Specifies the phrase track(s) or pattern whose durations will be
changed.
Value
ALL:
Phrase Tracks 1–16
TRK 1–TRK 16:
The specified phrase track
PTN001–PTN100:
The specified pattern
Ch / Part
Specifies the MIDI channel(s) of notes for which duration will be
modified.
If you wish to modify the duration for notes of all MIDI channels, set
this parameter to ALL. When changing the duration for notes of a
specific MIDI channel only, select that MIDI channel using this
parameter.
Value:
ALL, Ch1–Ch16
Measure, For (Edit Range)
Specifies the range of measures whose durations will be changed. If
you set “For” to “ALL,” all measures will be specified.
Bias
Set this parameter if you wish to increase or decrease all durations
by a fixed amount. If you want to extend all duration by 10, set this
to “+10.”
Value:
-4800– +4800
Magnify
Set this parameter if you wish to increase or decrease durations by a
specified ratio. When set to “100%,” no change is made. A value of
“101%” or higher increases the duration; values of “99%” or lower
decrease the duration. For example, to halve duration, set this
parameter to “50%.” To double durations, set this parameter to
“200%.”
Value:
0–200%
Range Min, Range Max
Specifies the range of note numbers for which duration will be
modified. For example, if you want to change the duration of notes
in the range of C3 to C4, set “Range Min” to “C3” and “Range Min”
to “C4.” You can also specify the key range by pressing keys on the
keyboard.
Modifying the Length of Notes
(Change Duration)
Fantom-X678_r_e.book 187 ページ ２００５年５月１２日 木曜日 午後４時４０分