Filter
Top Products
184
Editing Songs
This function deletes a specified area of sequencer data, and moves
the subsequent data to fill the gap. As a result, the measure length
will be shortened by the number of deleted measures.
fig.19-012_50
For details on the settings, refer to
“Basic Operation for Track
Editing”
(p. 180)
Track / Pattern
Specifies the track(s) or pattern that is to be deleted.
Value
ALL:
Phrase tracks 1–16, the beat track, and the tempo
track
TRK 1–TRK 16:
The specified phrase track
TEMPO:
Tempo track
PTN001–PTN100:
The specified pattern
Measure, For (Edit Range)
Specifies the range of measures that are to be deleted. If you set
“For” to “ALL,” all measures will be specified.
This function copies a specified area of sequencer data. It is
convenient for repeating the same phrase several times. You can
copy patterns to a phrase track, or copy data from a phrase track to a
pattern.
fig.19-013_50
For details on the settings, refer to
“Basic Operation for Track
Editing”
(p. 180)
Src Track / Pattern (Source Track / Pattern)
Specifies the copy-source track(s) or pattern.
Value
ALL:
Phrase tracks 1–16, the beat track, and the tempo
track
TRK 1–TRK 16:
The specified phrase track
TEMPO:
Tempo track
PTN001–PTN100:
The specified pattern
Ch / Part
Selects the MIDI channel of the data to be copied.
When you want to copy all the sequencer data, set this parameter to
“ALL.” To copy only the sequencer data of a specific MIDI channel,
select the MIDI channel.
Value:
ALL, Ch1–Ch16
If you set the source track to “TEMPO,” or if the Status
parameter is set to “System Exclusive,” “Tune Request” or
“Pattern Call,” the Channel parameter will not be available.
Src Measure, For (Edit Range)
Specifies the range of copy-source measures. If you set “For” to
“ALL,” all measures will be specified.
Dst Track/ Pattern (Destination Track/Pattern)
Check/modify the copy-destination track or pattern.
Value
ALL:
Phrase tracks 1–16, the beat track, and the tempo
track
TRK 1–TRK 16:
The specified phrase track
TEMPO:
Tempo track
PTN001–PTN100:
The specified pattern
If you set the source track to “ALL,” the destination track can be
set to either “ALL” or “PTN001–PTN100.” If you select
“PTN001–PTN100,” the data from the 16 phrase tracks will be
merged as it is copied.
• If “TEMPO” is selected as the source track, then only “Tempo”
can be selected for the destination track.
Dst Measure (Destination Measure)
Specifies the copy-destination measure.
If you want the copy destination to be right after the last measure of
a song, set this parameter to “END.”
Copy Mode
Specifies whether you want to preserve the existing data in the copy
destination when copying.
Value
MIX:
Combines the data from the copy source with the
existing data in the copy destination.
REPLACE:
Musical data in the copy destination will be erased
(i.e., overwritten) when the copy takes place. Only
the sequencer data of the MIDI channels specified by
the Channel parameter will be overwritten, and data
of other MIDI channels will remain.
Copy Times
Specifies the number of times that the data will be copied to the copy
destination.
Deleting Unwanted Measures
(Delete)
Copying Phrases (Copy)
Fantom-X678_r_e.book 184 ページ ２００５年５月１２日 木曜日 午後４時４０分