Filter
Top Products
167
Playing Back a Song
You can start/stop song playback by passing your hand over the D
Beam controller.
1.
Select the song that you want to play back (p. 164).
2.
Hold down [SHIFT] and press D BEAM [ASSIGNABLE].
The D Beam Assignable screen appears.
fig.17-006_50
3.
Use [CURSOR] to move the cursor to “Type.”
4.
Turn the VALUE dial or press [INC]/[DEC] to set this to
“START/STOP.”
5.
Press D BEAM [ASSIGNABLE] to turn on the D Beam
controller.
6.
When you pass your hand across the D Beam controller,
song playback will start. When you pass your hand across
it once again, playback will stop.
You can also start/stop song playback by using a pedal
connected to the PEDAL CONTROL jack (p. 226).
Using the D Beam Controller to
Start/Stop Song Playback
Fantom-X678_r_e.book 167 ページ ２００５年５月１２日 木曜日 午後４時４０分