Filter
Top Products
67
Section 3. Using effects
Section 3
A sound with a subtly shifted pitch is added to
the direct sound, making the final output sound
thicker and broader.
* This effect can be used when the FX “Type” parameter
is set to “CHORUS.”
On/Off OFF, ON
This parameter turns the chorus effect on/off.
Rate 0 – 100
Adjusts the rate of the Chorus effect.
Depth 0 – 100
Adjusts the depth of the Chorus effect.
Effect Level 0 – 100
Adjusts the volume of the effect sound.
This corrects differences in input to create a
steadier, more even volume balance. This is used
to extend the sustain of input sounds and,
conversely, to shorten sustain and emphasize the
attack portion of sounds.
Another use of compression is as a “limiter,”
which prevents distortion by suppressing only
volume peaks.
* This effect can be used when the COSM GTR AMP’s
FX “Type” parameter is set to “COMPRESSOR.”
On/Off OFF, ON
This parameter turns the compressor effect on/
off.
Sustain 0 – 100
This adjusts the depth of the effect. Higher
settings values result in longer sustain times. Set
this to a lower value when using compression for
the limiter effect.
Attack 0 – 100
Adjusts the strength of the attack. Larger values
will result in a sharper attack, creating a more
clearly defined sound.
Level 0 – 100
Adjusts the volume.
This creates a thicker sound by applying a
delayed sound to the direct sound.
On/Off OFF, ON
This parameter turns the delay effect on/off.
Type
This Parameter selects the type of delay.
Delay Time SINGLE: 1 – 1000 (ms)
TAP: 1 – 500 (ms)
This parameter adjusts the delay time (i.e., the
interval for which sound is delayed).
Feedback 0 – 100
This parameter adjusts the amount of feedback.
Changing the amount of feedback causes the
number of time the delayed sound is repeated to
change as well.
Effect Level 0 – 120
Adjusts the volume of the delay sound.
Parameter List
The trademarks listed in this document are trademarks of their respective owners, which are
separate companies from BOSS.
Those companies are not affiliated with BOSS and have not
licensed or authorized BOSS’s MICRO BR. Their marks are used solely to identify the
equipment whose sound is simulated by BOSS’s MICRO BR.
Chorus
Compressor
Delay
Parameter
Explanation
SINGLE
This is a simple delay.
TAP The delayed sound is panned across the
left and right channels. This will be ef-
fective when stereo recording.
MICRO-BR_e1.book 67 ページ ２００６年８月１日 火曜日 午後１２時６分