Filter
Top Products
105
Section 7
Section 7.
Other Convenient Functions
Depending on where the MICRO BR is situated,
the display contents may be difficult to read. If
this is the case, perform the procedure given
below to adjust the contrast (1 to 20).
1.
Press [UTILITY].
2.
Press CURSOR [ ][ ] several times
to access the LCD Contrast screen.
fig.06-020
3.
Use VALUE [-][+] to adjust the value.
4.
If you decide the contrast, press [EXIT]
(or [UTILITY]).
The MICRO BR has a built-in “chromatic tuner
function” that allows you to tune your
instrument quickly.
The built-in tuner supports both guitar and bass
guitar.
As an example here, we will explain how to use
the tuner to tune your guitar.
* It is not possible to play back or record while using the
tuner.
Check the following points before you
begin.
• Your guitar is connected to the GUITAR IN jack.
• “GTR” is selected as the input source.
• The Sns parameter is at the highest value possible
without causing the OVER icon to light (p. 14).
Adjusting the Display
Contrast
If you press and hold [UTILITY] while
turning the TIME/VALUE dial, you will be
able to change the contrast in real time.
Choose the method that best suits the
MICRO BR’s setup.
Tuning an Instrument
(Tuner)
MICRO-BR_e1.book 105 ページ ２００６年８月１日 火曜日 午後１２時６分