Filter
Top Products
30
Creating a new song
The MICRO BR contains three effect processors;
insert effects, reverb, and mastering tool kit. Here
we’re going to explain how to select GTR (guitar)
as the input source, and use the insert effects.
For more about insert effects, refer to “Section 3.
Using effects” (p. 61).
1.
Press [EFFECTS].
The currently selected effect patch is
displayed.
2.
Use CURSOR [ ][ ] to move the
cursor to the patch number, and use
VALUE [-][+] to select “01:JC Clean”.
The MICRO BR contains some insert effects,
but for this example we’ll select “01:JC
Clean”.
fig.Disp-FX-GT-P01.eps
For details, refer to “Section 3. Using effects” (p.
61).
1.
Press [EFFECTS].
The currently selected effect patch is
displayed.
2.
Press [TR1] several times.
fig.Disp-FX-GT-P01off.eps
Make sure that the TR1 indication has
changed from “ON” to “OFF.”
MICRO BR is set to output sound without
the insert effects applied, allowing you to
record sounds without the insert effects.
Using effects (Insert
Effects)
Selecting an effect patch