Filter
Top Products
14
Panel Descriptions
12.
(Fast-Forward)
Fast-forwards the song while you hold
down this button.
13.
(Recording)
When you press , the indication
appears in the display, and the MICRO BR
enters recording-standby mode. Recording
will begin when you then press .
In addition to recording operations, this
button is also used to perform punch-in/out
operations.
14.
[A B] (AB button)
Accesses a screen in which you can make
settings for the Repeat function (which
repeatedly plays a desired region), set the
punch-in/out region, or specify the track
editing region.
15.
[INPUT]
Accesses a screen where you can select the
input jack or onboard microphone, and
adjust the input sensitivity.
16.
VALUE [-][+]
When you’re making settings, these buttons
are used to edit the values.
17.
MIC (Onboard Microphone)
This is a monaural microphone built into the
MICRO BR. If you want to record using the
onboard microphone, refer to (p. 39).
18.
Display
Shows various information such as song
time, volume level, or menu screens for the
function you’re using.
If you find the display screen difficult to
read, refer to (p. 105).
• The value will continue changing if
you press and hold VALUE [-] [+]
• The value will increase rapidly if you
hold down VALUE [+], then press
and hold VALUE [-].
• The value will decrease rapidly if you
hold down VALUE [-], then press
and hold [+].
Maintenance
• For everyday cleaning wipe the unit
with a soft, dry cloth or one that has
been slightly dampened with water.
To remove stubborn dirt, use a cloth
impregnated with a mild, non-
abrasive detergent. Afterwards, be
sure to wipe the unit thoroughly with
a soft, dry cloth.
• Never use benzine, thinners, alcohol
or solvents of any kind, to avoid the
possibility of discoloration and/or
deformation.
MICRO-BR_e1.book 14 ページ ２００６年８月１日 火曜日 午後１２時６分