Filter
Top Products
36
Using the MP3 player
Remove the central sound of the playback (e.g.,
vocals or guitar solos). This is helpful if you want
to practice playing along with the backing
instruments.
1.
Press [MP3/TRAINER] to switch to
MP3 mode.
The MP3 player screen will appear.
fig.Disp-mp3-mode.eps
2.
Use CURSOR [ ][ ] to move the
cursor to the file number, and use
VALUE [-][+] to select the file number
that you want to play.
3.
Use CURSOR [ ][ ] to make the
display indicate “CENTER CANCEL.”
fig.Disp-mp3-mode.eps
4.
Press [TR1] to turn on the Center
Cancel function.
Each time you press [TR1], the setting will
alternate between “ON” and “OFF”.
5.
Press .
Sounds that are heard from the center (such
as vocals and guitar solos) will be
eliminated.
Slowly turn the VOLUME dial to adjust the
volume.
The guitar etc. are connected, and it is
possible to play while listening the MP3/
WAV file.
6.
If you want to eliminate a sound that
is located in a position other than the
center, Press [TR4] (EDT).
The CenterAdjst screen will appear.
fig.Disp-CENTER-ADJ.eps
7.
Use VALUE [-][+] to adjust.
8.
When you finished MP3 mode, press
[MP3/TRAINER] again.
Canceling the center sound
(Center Cancel)