Filter
Top Products
Fine Tuning Your System
95
En
EXPERT
PHONO/LINE Setup
The PHONO/LINE setup allows you to decide whether you'll hook up a turntable or a line level component (most
components, like CD players and DVD players, are line level).
1 Turn on the receiver and your TV,
press RECEIVER on the remote con-
trol.
2 Press the SYSTEM SETUP button.
3 Looking at the on-screen display on
your TV, use the buttons to select
PHONO/LINE SETUP. Press the ENTER
button.
4Use the buttons to select the
PHONO or LINE. Press ENTER.
PHONO: Use this setting for turntables (without a built-in
equalizer or pre-amplifier).
LINE: Use this setting for all audio components other
than a turntable and for turntables with a built-in phono
equalizer.
5 EXIT should be selected (if not, use
the buttons to select it). Press
ENTER.
6Use the buttons to select EXIT
and press ENTER, again.
This exits the SYSTEM SETUP mode and returns to
normal operation.
Memo:
The default is PHONO.
3
4
3-6
2
VSX-AX5i.book Page 95 Friday, May 23, 2003 6:33 PM