Filter
Top Products
Connecting Your Equipment
26
En
Speaker impedance
You can change the speaker impedance for VSX-AX5i but we recommend using speakers with an impedance
of 8 Ω - 16 Ω (the default setting). If you are using 6 Ω - less than 8 Ω impedance speakers, you need to
change the impedance setting. Use any speaker rated between 6 Ω - 16 Ω .
First put the receiver in STANDBY mode, then
press the power button while holding down the
SPEAKERS button.
The receiver will reset to the new impedance setting.
With this method you can choose the 8 Ω - 16 Ω
setting or the 6 Ω - 8 Ω setting.
(This display indicates a 6Ω -
less than 8Ω impedance
setting.)
(This display indicates an 8Ω
- 16Ω impedance setting.)
VSX-AX5i.book Page 26 Friday, May 23, 2003 6:33 PM