Filter
Top Products
Techno Tidbits and Problem-solving
118
En
Specifications (multi-voltage model)
Video Section (Composite)
Input (Sensitivity/Impedance)
LINE....................................................................1 Vp-p/75 Ω
Output (Level/Impedance)
LINE....................................................................1 Vp-p/75 Ω
Frequency Response
LINE...................................................5 Hz to 10 MHz
+
–
0
3
dB
Signal-to-Noise Ratio......................................................65 dB
FM Tuner Section
Frequency Range...................................87.5 MHz to 108 MHz
Usable Sensitivity............. Mono: 13.2 dBf, IHF (1.3 µV/75 Ω)
50 dB Quieting Sensitivity ..............................Mono: 20.2 dBf
Stereo: 38.6 dBf
Signal-to-Noise Ratio....................... Mono: 73 dB (at 85 dBf)
Stereo: 70 dB (at 85 dBf)
Distortion ................................................Stereo: 0.5 % (1 kHz)
Alternate Channel Selectivity........................60 dB (400 kHz)
Stereo Separation...............................................40 dB (1 kHz)
Frequency Response.......................30 Hz to 15 kHz (± 1 dB)
Antenna Input.............................................. 75 Ω unbalanced
AM Tuner Section
Frequency Range...............531 kHz to 1,602 kHz (9 kHz step)
530 kHz to 1,700 kHz (10 kHz step)
Sensitivity (IHF, Loop antenna).................................350 µV/m
Selectivity.........................................................................25 dB
Signal-to-Noise Ratio......................................................50 dB
Antenna.............................................................. Loop antenna
Miscellaneous
Power Requirements
...............................AC 110/120–127/220/230–240 V, 50/60 Hz
Power Consumption ......................................................600 W
Power Consumption in Standby mode..........................0.9 W
Dimensions........................420 (W) × 188 (H) × 464 (D) mm
Weight (without package) ............................................19.9 kg
Furnished Parts
FM wire Antenna.....................................................................1
AM loop Antenna....................................................................1
“AA” IEC LR6 batteries............................................................4
Remote Control Unit...............................................................1
Microphone for Auto Surround Sound Setup ......................1
Microphone Stand for Auto Surround Sound Setup ...........1
AC Power Cord........................................................................2
Operating Instructions............................................................1
Flat-bladed converter plug......................................................1
Antenna Adaptor.....................................................................1
NOTE:
Specifications and the design are subject to possible modi-
fications without notice, due to improvements.
Maximum Output Power................................130 W/channel
(1 kHz, THD 10.0 %, 8 Ω)
Continuous Power Output (DIN)
Front................100 W + 100 W (DIN 1 kHz, THD 1%, 8 Ω)
Center .............................100 W (DIN 1 kHz, THD 1%, 8 Ω)
Surround.........100 W + 100 W (DIN 1 kHz, THD 1%, 8 Ω)
Surround Back
..................100 W + 100 W (DIN 1 kHz, THD 1%, 8 Ω)
Rated Power Output ...................................... 100 W + 100 W
(20 Hz – 20 kHz, 0.09 %, 8 Ω)
Audio Section
Input (Sensitivity/Impedance)
PHONO MM...................................................4.7 mV/47 kΩ
LINE................................................................335 mV/47 kΩ
Frequency Response
PHONO MM...........................20 Hz to 20,000 Hz ± 0.3 dB
LINE..............................................5 Hz to 100,000 Hz
+
–
0
3
dB
Output (Level/Impedance)
LINE...............................................................335 mV/2.2 kΩ
Tone Control
BASS...........................................................± 6 dB (100 Hz)
TREBLE.......................................................± 6 dB (10 kHz)
LOUDNESS................................+4/+2 dB (100Hz/10 kHz)
(at volume position -40dB)
Signal-to-Noise Ratio (IHF, short circuited, A network)
LINE............................................................................101 dB
Signal-to-Noise Ratio
[DIN (Continuous rated power output/50 mW)]
LINE.........................................................................92/65 dB
Signal-to-Noise Ratio [EIA, at 1 W (1 kHz)]
LINE..............................................................................83 dB
* Measured pursuant to the Federal Trade Commission’s
Trade Regulation rule on Power Output Claims for
Amplifiers.
** Measured by Audio Spectrum Analyzer.
Video Section (S jack)
Input (Sensitivity/Impedance)..............................1 Vp-p/75 Ω
Output (Level/Impedance)....................................1 Vp-p/75 Ω
Frequency Response ...........................5 Hz to 10 MHz
+
–
0
3
dB
Signal-to-Noise Ratio......................................................65 dB
Video Section (Component)
Input (Sensitivity) .................................................1 Vp-p/75 Ω
Output (Level/Impedance)....................................1 Vp-p/75 Ω
Frequency Response ........................... 5 Hz to 40 MHz
+
–
0
3
dB
Signal-to-Noise Ratio...................................................... 65
dB
VSX-AX5i.book Page 118 Friday, May 23, 2003 6:33 PM