Filter
Top Products
Using Other Functions
85
En
EXPERT
Adjusting the Light on the Remote Control
This feature allows you to adjust the brightness of the light on the remote control.
1 Press the REMOTE SETUP button for
three seconds.
The REMOTE SETUP menu appears on the remote
display.
2Use the buttons to select LIGHT
and press ENTER.
3Use the buttons to select HIGH,
LOW, or EXIT and press ENTER.
HIGH: The brightest setting
LOW: A dimmer setting
OFF: Turns the remote control light off.
EXIT: Leaves the LIGHT setting and returns you to the
REMOTE SETUP menu.
After pressing ENTER in the first three cases, COMPLETE
will appear in the display and you will be returned to the
REMOTE SETUP menu.
4 Select EXIT and press ENTER.
You will exit the REMOTE SETUP menu and return to
normal operation.
Memo:
• To exit from the REMOTE SETUP mode at any time press
the REMOTE SETUP button.
• The display will disappear after one minute or so if no new
commands are entered. Press any button to wake up the
remote and continue the process.
VSX-AX5i.book Page 85 Friday, May 23, 2003 6:33 PM