Filter
Top Products
Using Other Functions
81
En
EXPERT
9 When done select EXIT and press
ENTER.
You will return to the REMOTE SETUP menu. Start again
from step 2 if you want to set do another MULTI CONTROL
button.
10Select EXIT and press ENTER again.
You will exit the REMOTE SETUP menu and return to
normal operation.
Performing Multi Operations
Do the following to use the multi operations.
1 Press the MULTI OPERATION button.
SELECT FUNCTION flashes in the display,
2 Press the MULTI CONTROL button for
the component that has been set up
with multi operations.
The power of the receiver (and any Pioneer components
use in the program) goes on and the programmed multi
operations are performed automatically.
VSX-AX5i.book Page 81 Friday, May 23, 2003 6:33 PM