Filter
Top Products
Displays and Controls
33
En
PREPARATION
EFFECT/CH SEL button
Switches between the different channels so you
can add volume individually to each channel with
the + and – buttons. Also selects EFFECT mode,
Dolby Pro Logic II MUSIC parameters (see
page 50) and sound delay settings (see page 53).
You can then use the + and – buttons to make
these adjustments.
SIGNAL SEL button (see page 46)
Press repeatedly to select one of the following:
AUTO: If there are analog and digital signals
input, the receiver automatically selects the dig-
ital signal.
DIGITAL: To select an optical or coaxial digital
signal.
ANALOG: To select an analog signal.
DNR (DIGITAL NR) button (see page 51)
Switches the DIGITAL NR on or off.
VIDEO SEL button (see page 57)
Use to toggle between the different video input
possibilities.
HI-BIT button (see page 54)
Use this button to switch the AUDIO SCALER on
or off.
5 SYSTEM SETUP button
Use for all system setups, including the speaker
and sound systems. For more information see
“Setting Up for Surround Sound” starting on
page 38. For a DVD player use this button to
bring up the DVD menu and for a tuner use this
button in the same way as the TUNER EDIT
button.
6 ////ENTER buttons
These buttons can be used for a variety of
operations in the SYSTEM SETUP menu.
These buttons are used to control the menus for
other components when in those modes (DVD,
digital TV tuner, satellite tuner, cable tuner, etc.).
In TUNER mode, they can select a station and/or
a frequency.
7 AUDIO button
Use to switch the audio tracks of a DVD when in
DVD mode.
8 Command button for other components
(see page 71)
Use these buttons to control other components
you selected with the MULTI CONTROL buttons.
You must input the preset code in order use this
function (see page 67).
9 TV CONTROL buttons
The following buttons are used to control the TV
only and can be used once they are preset to
control your TV.
TV INPUT: Press to select the input source for
the TV.
TV CH +/– : Use these buttons to change the
channel of the TV.
TV VOL +/– : Press to control the volume of the
TV.
10 Listening mode buttons (see page 47)
SURROUND buttons (MOVIE, MUSIC, &
ENTER):
MOVIE: Press to put the receiver into MOVIE
listening mode (see page 48).
MUSIC: Press to put the receiver into MUSIC
listening mode (see page 49).
: Use to select the MOVIE or MUSIC
listening mode.
ENTER: Use this button to enter information
concerning the listening modes.
STEREO/DIRECT (see page 47): Switches the
receiver into STEREO mode if it was in a different
sound mode or toggles between DIRECT and
STEREO mode.
11 SB CH MODE button (see page 55)
Use this button to turn the surround back
channels ON/OFF/AUTO or switch the virtual
surround back mode between ON/OFF/AUTO.
12 SYSTEM OFF button (see page 82)
This button turns off components in two ways.
First, when pressed it will turn off all PIONEER
components. Secondly, any component that has
programmed into the SYSTEM OFF settings will
be turned off.
13 RECEIVER (STANDBY/ON) button
Press to turn power of the receiver on or to
standby (off).
14 MULTI OPERATION button
Use this button to start the multi operation
mode. See page 80 for how to program and use
the multi operation mode.
15 RECEIVER button
Use this button to switch the remote control into
receiver mode in order to get certain receiver
functions or do receiver setups.
VSX-AX5i.book Page 33 Friday, May 23, 2003 6:33 PM