Filter
Top Products
Remote Control of Other Components
67
En
BASIC
Setting Up the Remote Control to Control Other
Components
In addition to controlling the receiver, the supplied remote control can operate your other components (VCR, TV,
DVD, CD, etc.) after you program it to do so. If your component(s) are listed in the remote control's memory, simply
follow the steps below. If your component(s) are not listed, or if you want the remote to learn additional operations,
you can use the learning mode to input the information from the remote controls supplied with your other
components.
Recalling Settings Stored in the Remote Control
The following steps show you how to recall the setting stored in the remote control. Once a setting is recalled and
the component assigned, you can use this remote to easily operate the component.
Memo:
• To exit from the remote control setup mode at any time, press REMOTE SETUP.
• See “Using Remote Control with Other Components” on page 71 to operate your other components.
• The display will disappear after one minute or so if no new commands are entered. Press any button to
wake up the remote and continue the process.
1 Press the REMOTE SETUP button for
three seconds.
The REMOTE SETUP menu appears on the remote dis-
play.
2 PRESET should be selected (if it isn't
use the buttons to select it) and
press ENTER.
SELECT FUNCTION flashes in the display.
3 Press the MULTI CONTROL button (for
example, DVD/LD) you want to set.
The TUNER button cannot be assigned.
4Use the buttons to select the
component you want to set up. Press
ENTER.
MAKER appears in the remote control display.
5Use the buttons to select the
name of the company that makes
your component (see page 116).
The company names appear in the remote control display.
If there is more than one component type for that com-
pany that makes your component then –1, –2, etc., will
appear in the display. Choose one of the types and see if
that works.
Displays & Controls
Remote Control of Other Components
VSX-AX5i.book Page 67 Friday, May 23, 2003 6:33 PM