Pioneer VSX-50 Stereo Receiver User Manual


 
Controlling components
This remote control can control components after entering the proper codes (see Setting the remote
to control other components on page 53 for more on this). Use the input function buttons to select
the component.
! The TV CONTROL buttons on the remote control are dedicated to control the TV assigned to the
TV CTRL button. If you have two TVs, assign the main TV to the TV CTRL button.
RECEIVER
D.ACCESS
CH
LEVELA.ATT
LISTENING MODE
DIMMER
SIGNAL SEL
MCACC SLEEP
TV
/
DTV MPX PQLS
PHASE
CTRL STATUS
PGM
iPod CTRL
HOME
MENU
TUNE
TUNE
TOOLS
LIST
CH
TV CONTROL
INPUT
INPUT
SELECT
iPod
USB
TUNER
SIRIUS
ADPTHMG
SAT
CDTV
RCU SETUP
SOURCERECEIVER
MULTI
OPERATION
BDR
BD DVD DVR HDMI
RECEIVER
ZONE2
TV CTRL
MUTE
MASTER
VOLUME
VOL
PRESET
TOP MENU
BAND GUIDE
T.EDIT
VIDEO
PARAMETER
AUDIO
PARAMETER
ENTER
PRESET
RETURN
CATEGORY
MEMORY MENU
AUTO
/
ALC
/
DIRECT
STEREOSTANDARD ADV SURR
AUDIO
INFO
CLASS
ENTER
DISP
HDD DVD
54 6
8
0
7 9
1 3
/
CLR
CH
22
S.RETRIEVER
2
En
56
10 Controlling the rest of your system
Erasing the settings for the
multi-operation
This erases all the settings programmed in the
remote control for the multi-operation.
1 Press and hold RCU SETUP, then press
‘8’ for three seconds.
Release the button after the LED flashes once.
The LED continues to flash.
! To cancel the preset setup mode press
RCU SETUP.
2 Press the input function button
containing the program you want to
cancel or the u SOURCE button for three
seconds.
If the LED lights for one second, the erasing has
been successfully completed.
Resetting the remote control
settings
Use this procedure to reset all the remote con-
trol’s settings to the factory default.
! When preset codes are set, all the signals
learned in the input function buttons are
cleared. This function is convenient when you
want to reset some but not all of input function
buttons.
1 Press and hold RCU SETUP, then press
‘0’ for three seconds.
Release the button after the LED flashes once.
The LED continues to flash.
2 Press and hold the ENTER button for
three seconds.
If the LED lights for one second, the erasing has
been successfully completed.
Default preset codes
Input function button Preset code
DVD
2158
BD
2160
DVR/BDR
2150
HDMI
2159
TV/SAT
0116
CD
5066
TV CTRL
0116