Pioneer VSX-50 Stereo Receiver User Manual


 
En
31
05
Basic playback
Button(s) What it does
e
<a>
Pauses/unpauses the slideshow.
DISP
<a>
Displays the photo information.
a You can only use this button when Theme on the
Slideshow Setup is set to Normal (OFF).
Slideshow Setup
Make the various settings for playing slide-
shows of photo files here.
1 Use i/j to select ‘Slideshow Setup’
from the USB Top menu.
2 Select the setting you want.
! Theme – Add various effects to the
slideshow.
! Interval – Set the interval for switching the
photos. This may not be available depending
on the Theme setting.
! BGM – Play music files stored on the USB
device while displaying photos.
! Music Select – Select the folder containing
the music files to be played when BGM is set
to ON.
3 When you’re finished, press RETURN.
You will return to the USB Top menu.
About playable file formats
The USB function of this receiver supports the following file formats. Note that some file formats
are not available for playback although they are listed as playable file formats.
Music files
Category Extension Stream
MP3
<a>
.mp3
MPEG-1, 2, 2.5 Audio
Layer-3
Sampling frequency 8 kHz to 48 kHz
Quantization bitrate 16 bit
Channel 2 ch
Bitrate 8 kbps to 320 kbps
VBR/CBR Supported/Supported
WAV .wav LPCM
Sampling frequency 32 kHz, 44.1 kHz, 48 kHz
Quantization bitrate 8 bit, 16 bit
Channel 2 ch, Monaural
WMA .wma
WMA8/9
<b>
Sampling frequency 8 kHz to 48 kHz
Quantization bitrate 16 bit
Channel 2 ch
Bitrate 8 kbps to 320 kbps
VBR/CBR Supported/Supported
a “MPEG Layer-3 audio decoding technology licensed from Fraunhofer IIS and Thomson multimedia.”
b Files encoded using Windows Media Codec 9 may be playable but some parts of the specification are not sup-
ported; specifically, Pro, Lossless, Voice.
Photo files
Category Extension
JPEG
.jpg
.jpeg
.jpe
.jif
.jfif
Format
Meeting the following conditions:
! Baseline JPEG format (including files recorded in Exif/DCF
format)
! Y:Cb:Cr - 4:4:4, 4:2:2 or 4:2:0
Resolution 30 to 8184 pixels vertical, 40 to 8184 pixels horizontal