Filter
Top Products
67
SET UP OPERATION
OPERATION
Using the front panel with the MULTI-ROOM system
1 Press the MULTI ROOM & SOURCE button.
The display shown below will illuminate when the receiver is in
STANDBY mode.
Also, the MR&S button will light.
2 Press the CONTROL button.
The light will start to blink.
3 Within ten seconds of step 2, select the FUNCTION
with the INPUT SELECTOR.
For this example we'll use the TUNER function. The display
shown below will illuminate.
4 Press the CONTROL button again and use the
INPUT SELECTOR to adjust the VOLUME. The
volume can be adjusted in a range of -82dB to 0dB.
The display will appear as shown below.
5 When in TUNER function, press the CONTROL
button and use the INPUT SELECTOR to tune in the
station.
The display will appear as shown below.
TUNER
MD/TAPE 1
VCR 1
TV/SAT
DVD/LD
CD
The INPUT SELECTOR steps through the functions in the
following order:
Turn the input selector until you get:
«
memo
If you don't turn the multi room function off you won't be able to turn the entire main room system off.
1 2 3, 4, 5
MULTI-ROOM
& SOURCE
INPUT
SELECTOR
MASTER
VOLUME
MIN MAX
F
M/AM
TUNER CONTROL
M
EMRY
-
TUNING +
-
STATION +
CONTROL
TUNER PHONO
MULTI-ROOM
& SOURCE
CONTROL
«
Using Other Functions