Filter
Top Products
21
SET
UP
Setting Up the Remote Control
Since this remote is based on LCD screens, you should try and get used to the touch-sensitive nature of the buttons as
well as the way in which different screens control different operations. You can move between the different screens
with the function buttons on the left and right and/or certain buttons within each screen. The EXIT button will always
return the remote control to the previous screen. In the explanations below you must complete the TOUCH PANEL
ADJUSTMENT setup to use the remote control properly. After that you can adjust various basic settings to suit your
personal preferences.
Initial Set Up
1 Press REMOTE SETUP on the remote control.
Access to the different setup modes appear on your remote
control screen.
2 Press the LCD COMMANDER button.
The different types of possible adjustments will appear on the
screen.
3 You must align the touch panel to make sure the
remote control responds properly when you touch
it. Press TOUCH PANEL ADJUSTMENT button.
On Screen Display
There are a number of possible ways to hook up the receiver to your video components, like a DVD player, and hook up
to your receiver to your TV, but some of them won't allow you to use the on-screen display of this unit. To avoid this
one simply needs to follow two rules.
1Always use the same type of video cords to hook up your video components to the receiver as you use to hook up
the receiver and your TV. For example, if you use composite video cords to hook up your DVD and the receiver, use
composite video cords to hook up the receiver to your TV. If you use S video cords to hook up your DVD and the
receiver, use S video cords to hook up the receiver to your TV.
2Always make sure your TV is set to the appropriate input channel (for example, video 1). Your TV may have a
number of input channels and if you don't select the proper one you won't be able to use this receiver's on-screen
display, or, in fact, see any picture from this receiver at all. If you are unsure how to choose an input channel for your
TV, refer to the manual which came with your TV.
You might, for example, use both composite and S video cords to hook up your video components with this receiver
and then use composite video cords to hook up this receiver to your TV. This arrangement would still NOT let you see
the on screen displays from this receiver on your TV. The best idea is just to use one type of video cord for all your
video component and TV hook ups.
3
RECEIVER
DVD/LD
TV/SAT
VCR1
VCR2
REMOTE
SETUP
MD/TAPE
CD
TUNER
TV
CONTROL
LCD Commander
TOUCH PANEL
ADJUSTMENT
BEEP ON
LCD CONTRAST
EXIT
LCD TIMER :
10
SEC
2
RECEIVER
DVD/LD
TV/SAT
VCR1
VCR2
REMOTE
SETUP
MD/TAPE1
CD
TUNER
TV
CONTROL
Remote Setup
LCD
COMMANDER
MULTI OPERATION
DIRECT FUNCTION
PRESET RECALL
LEARNING
EXIT
1