Filter
Top Products
56
1
Press to switch the satellite tuner on or off.
2 EXIT
Press to exit the current setting of the SAT.
3 OFF/ON
Press to switch the satellite tuner off.
4 CH –/+
Use to chnage channels on the satellite tuner.
5 GUIDE
Use to turn the program information screen on or off.
6 MENU
Use to turn the main menu on or off.
7 Number buttons
Use to select satellite channels.
8 L1-3
Freely assignable keys where you can enter any
command you like-refer to p. 47 for more on this.
STB (SAT)
1
2
4
7
8
9
5
6
3
MENU GUIDE
CH
CH
L2 0 L3
OFF /ON
EXIT
L1
1
2
8
7
5
4
3
6
Satellite Tuner screen 1
STB (satellite tuner) operations
• The following operations are available from the receiver's remote control after you program your satellite
tuner into it, but some operations may need to be learned separately by the receiver (see “Setting Up the
Remote Control to Control Other Components,“ p. 47-50).
• To perform these operations, press the TV/SAT button to set the remote to the SAT operation mode.
• For more information on individual commands consult the manual that came with the component.
• When presetting a satellite tuner other than one made by PIONEER, screen1 will appear.
• When presetting a PIONEER satellite tuner, screen 2 will appear.
memo
STB (SAT)
1
2
4
7
8
9
5
6
3
EXIT
DE
0
L1
A
B
C
L2
GUIDEMENU
2
4
7
1
3
6
5
Satellite Tuner screen 2
1
Press to switch the satellite tuner on or off.
2 A/B/C/D/E
Use to make selections from the SAT menu.
3 MENU
Use to turn the main menu on or off.
4 GUIDE
Use to turn the program information screen on or off.
5 Number buttons
Use to select satellite channels.
6 L1-2
Freely assignable keys where you can enter any
command you like-refer to p. 47 for more on this.
7 EXIT
Press to exit the current setting of the SAT.
Remote Control of Other Components