Filter
Top Products
30
Initial Set Up
1 Press BASS PEAK LEVEL MANAGER.
2 Press the TEST TONE button.
The MASTER VOLUME rotates to MIN (----dB).
A test tone will sound or not depending on which speakers you have
selected. If sub woofer is YES (or on PLUS) the test tone will only
sound from the sub woofer. If the sub woofer is off and the front and
surround speakers are set to large, front and surround speakers will
sound the test tone.
3 Use the +/– buttons (or the MASTER VOLUME +/– on the
bottom right of the remote control) to specify the bass
peak level.
1 Raise the level gradually.
2 Set the bass peak level at the point just before the tone starts to
distort.
4 Press the SET button to input the level.
The display on the receiver will say RESUME and the MASTER
VOLUME will return to its original position.
5 Press SETUP OK .
You may need to experiment with different Dolby Digital sources
before you can get the BASS PEAK LEVEL set correctly.
If you want to change a setting before proceeding
Use the +/– buttons (or the MASTER VOLUME +/–) to change the BASS
PEAK LEVEL.
BASS PEAK LEVEL MANAGER
The LFE (Low Frequency Effect) channel in Dolby Digital or DTS program sources can produce heavily concentrated
ultra-low bass tones that may exceed the capabilities of your speaker system. The following steps show you how to set
the peak level for the ultra-low bass (LFE) channel. If continuing from CROSSOVER NETWORK go to step 1. If starting
fresh, complete steps 1-3 in "Setting Up for Surround Sound" (p.23) first.
memo
dB
STEREO
SIGNAL
SELECT
ANALOG
SP
A
AUTO
VOLUME
«
dB
STEREO
SIGNAL
SELECT
ANALOG
SP
A
AUTO
VOLUME
If you press CANCEL no settings are input to the receiver but the screen remains on the remote control. To
escape the screen you must press SETUP OK.
dB
STEREO
SIGNAL
SELECT
ANALOG
SP
A
AUTO
VOLUME
«
dB
STEREO
SIGNAL
SELECT
ANALOG
SP
A
AUTO
VOLUME
2
3
1
System Setup
SPEAKER
SETTING
CROSSOVER
NETWORK
BASS PEAK LEVEL
MANAGER
DYNAMIC RANGE
CONTROL
DIGITAL INPUT
SELECT
MULTI ROOM
CHANNEL DELAY
CHANNEL LEVEL
EXIT
MASTER VOLUME +/–
CANCEL
4
5
Bass Peak Level Manager
SETUP
OK
CANCEL
TEST
TONE
SET
+
VOL
+
CD
TUNER
TV
CONTROL
MUTING
MASTER VOLUME
M
–
VOL
–
CH
FUNCTION