Pioneer VSX-29TX Stereo System User Manual


 
25
SET
UP
Initial Set Up
dB
SIGNAL
SELECT
ANALOG
SP
A
VOLUME
3 Press SETUP OK to return to the SYSTEM SETUP MENU.
Hold the remote control pointed towards the receiver until you see the
“RECEIVED” display on the receiver.
If "ERROR" flashes in the display, perform the setup operations from
the first step again.
Next, proceed to CHANNEL DELAY below.
If you want to change a setting before proceeding
simply press the button of the speaker you want to change.
Speaker Setting
SETUP
OK
FREE
THX
3
Speaker Setting
[LARGE]
[LARGE]
[LARGE]
[ YES ]
Front L
Center
Surround
Subwoofer
[FREE] [THX]
Speaker Setting
SETUP
OK
FREE
THX
«
These settings will be displayed on your TV.
memo
If you have a sub woofer and like lots of bass, it may seem logical to select LARGE for your FRONT speakers and leave
the sub woofer selected. This may not, however, yield the best bass results. Depending on the size and shape of your
room you may actually experience a decrease in the amount of bass due to what is called "low frequency
cancellations." If you have a sub woofer, listen to the bass response with the FRONT speakers set to LARGE and SMALL
alternatively and let your ears judge which sounds best.
The safest option in this case is to route all the bass sounds to the sub woofer by selecting SMALL for the FRONT
speakers.