Filter
Top Products
36
1 Press RECEIVER.
This sets the remote to select the sound mode.
(You can skip this step when using the controls on the
receiver.)
2 Select the sound mode.
• For HOME THX CINEMA \ Press THX
• For ADVANCED THEATER \ Press ADVANCED
THEATER
Each press changes the ADVANCED THEATER mode as
follows:
• For STANDARD \ Press STANDARD
• For DSP modes \ Press DSP repeatedly
Each press changes the DSP mode as follows:
• For STEREO \ Press STEREO
Selecting a Sound Mode
To ensure the best possible surround sound, be sure to complete the set up procedures described in “Setting Up for
Surround Sound” (starting on page 23) before using the sound modes. This is particularly important when using the
(Dolby) Digital or DTS sources. When using the sound modes, using SPEAKERS A will give the best results. If you use
SPEAKERS B the sound will be down mixed to the two front B speakers.
Surround operation
• The effects of ADVANCED THEATER mode can be adjusted
in the range of 10 to 90 by pressing EFFECT +/– (The default
setting is 70). Also, the effect level can be set in each
ADVANCED THEATER mode by pressing the EFFECT(+/–)
button. 5-D THEATER modes cannot be changed.
• The amount of effect of each DSP mode can be adjusted in
the range of 10 to 90 (the default setting value is 70) by
pressing EFFECT +/–.
• When a digital input is selected, using some discs with a
huge amount of information may cause the overload
indicator to light up. If the overload indicator is lit in the
THX, ADVANCED THEATER and DSP mode, the signal may
be distorting. To ensure there's no distortion you can switch
to the STANDARD mode.
= MUSICAL = DRAMA = ACTION
5-D THEATER +
= HALL 1 = HALL 2 = JAZZ = DANCE
THEATER 2 + THEATER 1 +
memo
Basic Playback
1
RECEIVER
DVD/LD
TV/SAT
VCR1
VCR2
REMOTE
SETUP
MD/TAPE
CD
TUNER
TV
CONTROL
Receiver
MAIN SUB
DSP STEREO
THX
ADVANCED
THEATER
EFFECT
STANDARD
MIDNIGHT
LOUDNESS
DIRECT
SIGNAL
SELECT
DIGITAL
NR
/ dts
DSP
STEREO EFFECT +/–
THX
ADVANCED
THEATER
STANDARD
DSP MODE STEREO
THX
CINEMA
ADVANCED
STANDARD