Filter
Top Products
66
Using Other Functions
1 Turn on the receiver, your TV and press
RECEIVER on the remote control.
Make sure your TV is set to the receiver.
2 Press SUB on the receiver screen.
3 Press the SYSTEM SETUP button.
The SYSTEM SETUP MENU appears on your remote control
screen.
You can escape from this screen at any time by pressing
EXIT.
4 Press the MULTI ROOM button.
The MULTI ROOM menu appears on the remote control
screen.
5 Select the VOLUME LEVEL by pressing
VARIABLE or FIXED.
If you hook up a just a power amplifier in the sub room the
VSX-29TX will act as a pre-amp. In this case choose
VARIABLE for the VOLUME LEVEL setting. If you hook up a
full integrated amplifier in the sub room (such as another
Pioneer VSX receiver) choose FIXED for the VOLUME LEVEL
setting.
6 Select the IR RECEIVER type.
If you have the Pioneer-made MR-100 select PIONEER. If you
have an IR RECEIVER from a different company, select
OTHERS.
7 Press SETUP OK.
This message will appear in the receiver's display.
If "ERROR" flashes in the display, perform the setup
operations from the first step again.
MULTI-ROOM set up
CAUTION!
If the MULTI ROOM is set to FIXED the volume on the main
unit will be set to maximum. Thus, when output, it will be
extremely loud. Please set the master volume controls of
the integrated amplifier in the sub room very low at first
and experiment to find the correct volume.
Multi-Room
Volume Level
[VARIABLE]
IR Receiver
[PIONEER]
CAUTION : If the "FIXED"
position is chosen, the
volume will be loud.
dB
SIGNAL
SELECT
ANALOG
SP
A
VOLUME
These settings will be displayed on your TV screen.
RECEIVER
DVD/LD
TV/SAT
VCR1
VCR2
REMOTE
SETUP
MD/TAPE1
CD
TUNER
TV
CONTROL
Receiver
MAIN SUB
DSP STEREO
THX
ADVANCED
THEATER
EFFECT
STANDARD
MIDNIGHT
LOUDNESS
DIRECT
SIGNAL
SELECT
DIGITAL
NR
/ dts
12
RECEIVER
DVD/LD
TV/SAT
VCR1
VCR2
REMOTE
SETUP
MD/TAPE1
CD
TUNER
TV
CONTROL
Multi Room
IR RECEIVER
SETUP
OK
LEVEL
MD
If the "FIXED" potision is chosen,
the volume will be loud.
PIONEER OTHERS
VARIABLE FIXED
5
7
6
RECEIVER
DVD/LD
TV/SAT
VCR1
VCR2
REMOTE
SETUP
MD/TAPE1
CD
TUNER
TV
CONTROL
Receiver
MAIN SUB
TREBLE
SYSTEM
SETUP
CH
LEVEL
INPUT
ATT.
BASS
EXTERNAL
5.1CH
TAPE 2
MONITOR
3
RECEIVER
DVD/LD
TV/SAT
VCR1
VCR2
REMOTE
SETUP
MD/TAPE1
CD
TUNER
TV
CONTROL
System Setup
SPEAKER
SETTING
CROSSOVER
NETWORK
BASS PEAK LEVEL
MANAGER
DYNAMIC RANGE
CONTROL
DIGITAL INPUT
SELECT
MULTI ROOM
CHANNEL DELAY
CHANNEL LEVEL
EXIT
4
memo
There may be some IR RECEIVERS that
can't be used with this receiver. Check with
a PIONEER representative to be sure.