Filter
Top Products
55
OPERATION
STB (DTV) operations
• The following operations are available from the receiver's remote control after you program your digital
tuner into it, but some operations may need to be learned separately by the receiver (see “Setting Up the
Remote Control to Control Other Components,“ p. 47-50).
• To perform these operations, press the TV/SAT button to set the remote to the DIGITAL TUNER operation
mode.
• For more information on individual commands consult the manual that came with the component.
• When presetting a PIONEER digital tuner, this screen will appear.
Remote Control of Other Components
memo
CATV
1
2
4
7
8
9
5
6
3
CH
ENTER
GUIDE
MUTE
MENU
0
PAGEPAGE
L1
L2
L3 L4
7
6
5
1
2
4
3
1 MUTE
Press to mute or restore the volume.
2 PAGE (–/+)
Use to displays other pages of on-screen information
if there is too fit one screen.
3 MENU
Use to display the main menu.
4 GUIDE
Use to display the Program Guide screen.
5 Number buttons
Use to select a specific TV channel.
6 L1-4
Freely assignable keys where you can enter any
command you like-refer to p. 47 for more on this.
7 CH ENTER
Use to select the channel specified with the number
buttons (not all models require this step).
STB (DTV)
1
2
4
7
8
9
5
6
3
MENU
CLEAR
YELLOW
0
BLUE
GREEN
RED
ENTER
CH
RETURN
CH
CH
L1 L2
8
7
6
5
4
3
1
9
2
Digital Tuner screen
1
Press to switch the digital tuner on or off.
2 MENU
Use to turn the main menu on or off.
3 CLEAR
Use to clears on-screen display.
4 BLUE/GREEN/RED/YELLOW
Use to make selections from the DTV (Digital TV)
menu.
5 CH –/+
Use to chnage channels on the satellite tuner.
6 CH RETURN
Use to return to the previous channel.
7 Number buttons
Use to select satellite channels.
8 ENTER
Use to select the channel specified with the number
buttons (not all models require this step).
9 L1-2
Freely assignable keys where you can enter any
command you like-refer to p. 47 for more on this.
CATV operations
• The following operations are available from the receiver's remote control after you program your CATV
into it, but some operations may need to be learned separately by the receiver (see “Setting Up the
Remote Control to Control Other Components,“ p. 47-50).
• To perform these operations, press the TV CONTROL button to set the remote to the CATV operation
mode.
• For more information on individual commands consult the manual that came with the your CATV.
memo