Filter
Top Products
42
Adjusting the brightness of the display (front panel only)
Use the FL DIMMER button to adjust the brightness of the fluorescent display (FL=fluorescent display).
Press FL DIMMER.
Four levels of brightness ranging from very dim to very bright
can be selected. Each press changes the brightness of the
display. When rotating through the options, the default
brightness can also be selected.
FL DIMMER
Please note: it is a feature of this unit that the fluorescent
display will be brighter for a few seconds after you choose
a function (like DVD/LD, CD, etc.) and then get softer. This will
still happen when you adjust the brightness but the new
setting will be the one the display softens to.
memo
Basic Playback
DIRECT
Direct playback
Press DIRECT on the remote control’s Receiver
MAIN screen or on the front panel.
This mode will give you the most accurate reproduction of two
channels sources.
memo
None of the tone controls or other sound modes can be used.
Receiver
MAIN SUB
DSP STEREO
THX
ADVANCED
THEATER
EFFECT
STANDARD
MIDNIGHT
LOUDNESS
DIRECT
SIGNAL
SELECT
DIGITAL
NR
/ dts
DIRECT
dB
STEREO
SIGNAL
SELECT
ANALOG
SP
A
VOLUME