Filter
Top Products
58
Other screen for preset operations
In addition to the operations mentioned in this section up to this point, the VSX-29TX is equipped with remote control
screens to deal with a variety of cutting edge technologies and components that may or may not have appeared on the
market yet. These include: CD-R (CD write-once discs deck), CD-RW (CD rewritable discs deck), and the latest
innovation, DVD video recorder.
If you have one of these components you can access the preset screen by going to the preset recall section of this
manual (p. 47) and following the instructions therein. Select the appropriate screen from the list presented and assign it
to a function button in the manner described. Then you can access the screen by simply pressing that function button.
Below are a list of the screens of cutting edge components you can access.
CD-R operations
Essentially all the controls are the same as those
explaining the screen for a regular CD player with the
added feature of being able to record. The (¶ REC) and
the REC MUTE buttons are explained on p.57 under the
cassette deck explanations.
DVD Video Recorder operations
Essentially all the controls are the same as those
explaining the screen for a regular DVD player with the
added feature of being able to record. The record button
(¶ REC) is explained on p.57 under the cassette deck
explanations. REC STOP is a special DVD video recorder
control that stops the recording but lets you start again
at any time.
CD-R
1
2
4
7
8
9
5
6
3
REC
REC
MUTE
RDM
PRGM
C
10 10
DVD Video Recorder
1
2
4
7
8
0
9
5
6
3
REC
MENU
CHCH
REC
STOP
10
Remote Control of Other Components
VCR operations
• The following operations are available from the receiver's remote control after you program your VCR
deck into it, but some operations may need to be learned separately by the receiver (see “Setting Up the
Remote Control to Control Other Components,“ p. 47-50).
• To perform these operations, press the VCR 1 or VCR 2 button to set the remote to the VCR operation
mode.
• For more information on individual commands consult the manual that came with the component.
1
Press to switch the VCR on or off.
2 CH –/+
Use to change channels on the VCR's tuner.
3 1˜¡
1 : Press to rewind the tape.
¡ : Press to fast foward the tape.
4 REC ¶
Press to start recording.
5 7
Press to stop playback.
6 3
Press to start playback.
7 8
Press to pause playback.
8 Number buttons
Use to change channels on the VCR.
9 L1-4
Freely assignable keys where you can enter any
commands you like-refer to p. 47 for more on this.
0 TV/VCR
Use this button to switch the VCR between it's TV
tuner and the video function.
memo
VCR
1
2
4
7
8
9
5
6
3
REC
CHCH
TV/
VCR
L2
L1
L3 0 L4
1
0
2
3
4
5
67
9
8