Filter
Top Products
44
Recording from the Tuner or
an Audio Source
You can record from the tuner or from
an external audio source connected to
the System 745, such as a turntable, a
VCR, or video equipment.
1. Load a blank cassette tape, or
one you want to record over, into
Deck 1.
2. Press
PLAY
on Deck 1, wait for
the blank tape to play past the
tape leader (about 8 seconds),
then press
STOP/EJECT
on Deck
1.
3. Press
TUNER
,
PHONO
, or
VIDEO
to select the audio source you
want to record from.
4. On Deck 1, press
PAUSE
then
RECORD
.
RECORD
and
PLAY
on
Deck 1 automatically lock down.
Caution:
Do not force down
RECORD
. This can damage the
recording mechanism.
5. Simultaneously press
PAUSE
on
Deck 1 and start the selected
audio source (if necessary). The
cassette records until it reaches
the end of the side, then it auto-
matically stops.
Note:
To pause recording, press
PAUSE
on Deck 1. To resume
recording, press
PAUSE
again.
6. To completely stop recording
before it automatically stops, stop
the selected audio source (if nec-
essary), then press
STOP/EJECT
on Deck 1. Press
STOP/EJECT
again to open the cassette com-
partment and remove the cassette
tape.
Note:
When you play back a cassette
tape on which you recorded an AM ra-
dio program, you might hear a high-
pitched tone or whistling sound. This
is called a beat. To reduce the beat
while playing a tape, set
HIGH SPEED
DUBBING/BEAT CANCEL
on the tape
deck to
NORMAL/1
or
HIGH/2
and
leave the switch on the setting that
gives the best recording quality.
13-1293.fm Page 44 Wednesday, July 14, 1999 6:49 PM