Filter
Top Products
25
3. Repeatedly press
DISC SKIP
DOWN
or
UP
on the CD changer
(or
DISC SELECT –
or
+
on the
remote control) until
DISC
and
the disc number you want to
select appear on the display’s
upper line, and the disc number
flashes on the display’s lower line.
The platform inside the CD
changer rotates the slot for that
disc number to the front.
Cautions
: To prevent damage to
the CD changer:
• Do not manually rotate or stop
the platform while it is rotating.
• Do not load or unload a CD
while the platform is rotating.
4. To load a CD, hold it vertically by
the edges with the label side to
the right, then gently insert it into
the slot in the center of the CD
changer.
Cautions:
To prevent damage to
the CD:
• Load only
CDs that are
marked with:
• Do not load anything other than
5-inch CDs into the CD
changer. Do not load single 3-
inch CDs with any type of
adapter device.
• Do not load more than one CD
into the same slot.
• Do not force a CD into the load-
ing slot. (While loading a CD,
always gently insert the CD into
the loading slot, then release it.)
5. Repeat Steps 3–4 to load up to 24
CDs.
6. Push the CD changer’s door up
until it clicks to close it.
7. Press
DISC CHECK
.
CHECKING
DISCS
scrolls once and flashes
three times on the display.
The CD changer selects each slot
on the platform and checks only
for the presence of a CD in each
slot on the platform, not if the CD
is defective or loaded incorrectly.
13-1293.fm Page 25 Wednesday, July 14, 1999 6:49 PM