Filter
Top Products
41
The
DIRECTION
indicator shows
the playback tape direction —
DIRECTION
(normal play-
back) or
DIRECTION
(reverse
playback).
Caution:
When the tape in Deck
2 reaches the end during fast-
forward or rewind, press
STOP/
EJECT
to release the mecha-
nism.
Note:
Deck 1 has a full-release
auto stop system to protect the
tape and prevent pinch roller dam-
age. When the tape reaches the
end during playback, recording,
fast-forward, or rewind, the tape
mechanism in Deck 1 automati-
cally releases.
4. Press
STOP/EJECT
to stop play-
back at any time.
USING CONSECUTIVE
PLAY (DECK 2 TO
DECK 1)
You can set the tape player to play
both sides of the tape in Deck 2, then
automatically play one side of the tape
in Deck 1.
1. Press in on Deck 2.
2. Press
PLAY
on Deck 2. The cas-
sette in Deck 2 plays.
3. While the cassette in Deck 2 is
playing, press
PAUSE
then
PLAY
on Deck 1.
When the cassette in Deck 2 finishes
playing both sides, the cassette tape
in Deck 1 automatically begins play-
back.
USING DOLBY NOISE
REDUCTION
The System 745’s cassette Deck uses
the Dolby-B NR (noise reduction) sys-
tem which lowers the level of back-
ground noise or “tape hiss” to one
third of the original level.
When listening to a recording, set
DOLBY NR
ON/OFF
to the setting used
when it was recorded.
REV
MODE
13-1293.fm Page 41 Wednesday, July 14, 1999 6:49 PM