Filter
Top Products
12
Connecting the AM Loop
Antenna
1. Unwind the supplied AM loop
antenna wires about two turns.
2. Hold down both
EXTERNAL
ANTENNA AM LOOP
terminal tabs,
insert the stripped ends of the
antenna’s wires into the holes,
then release the tabs.
3. Position the AM loop antenna for
the best reception.
CONNECTING OTHER
AUDIO SOURCES
Connecting a Turntable
Caution:
Do not place a turntable on
top of the system or on any other com-
ponent that gets hot.
Notes:
• The turntable’s cables must have
phono-type plugs.
• Be sure to match the left and right
plugs on the cables with the
PHONO L
and
R
jacks on the sys-
tem.
1. Plug the turntable’s cables into the
PHONO L
(white) and
R
(red) jacks
on the back of the system.
2. If the turntable has a ground wire,
use a Phillips screwdriver to con-
nect it to the
GND
terminal on
the back of the system.
Connecting Video Equipment
If you have a VCR or other equipment,
such as a video disc player or a TV
that has line-level audio outputs, you
can play the sound through the Sys-
tem 745.
Use a stereo cable (such as Cat. No.
42-2352, not supplied) to connect the
source’s left and right audio output
jacks to the
VIDEO L
(white) and
R
(red) jacks on the back of the system.
13-1293.fm Page 12 Wednesday, July 14, 1999 6:49 PM