Filter
Top Products
20
USING THE TUNER
Press
TUNER
on the system (or
TUN-
ER/BAND
on the remote control). The
tuner automatically tunes to the sta-
tion that was playing when you last
turned it off. The station’s frequency
and band (
AM
or
FM
) appears on the
display.
When you receive an FM station in
stereo,
STEREO
appears on the dis-
play.
If FM stereo reception is noisy, press
FM/TUNE MODE
on the system until
MONO
appears on the display and
AUTO
disappears. The sound is no
longer in stereo, but the reception
should improve.
You can tune to other AM or FM radio
stations using manual, seek, or mem-
ory tuning.
MANUAL TUNING
1. Press
BAND
on the system (or
TUNER/BAND
on the remote con-
trol) until
AM
or
FM
appears on the
display.
2. Repeatedly press
FM/TUNE MODE
on the system until
AUTO
disap-
pears from the display.
3. Repeatedly press (or hold down)
TUNING DOWN
or
UP
to tune down
or up the selected band.
SEEK TUNING
Follow these steps to tune to the next
higher or lower station with a strong
signal.
1. Repeatedly press
BAND
on the
system (or
TUNER/BAND
on the
remote control) until
AM
or
FM
appears on the display.
2. Repeatedly press
FM/TUNE MODE
on the system until
AUTO
appears
on the display.
3. Press
TUNING DOWN
or
UP
. The
system automatically tunes to the
next strong station.
13-1293.fm Page 20 Wednesday, July 14, 1999 6:49 PM