Optimus - Katadyn Products Inc. 745 Stereo System User Manual


 
18
Select OFF (so neither indicator
lights) when using stereo head-
phones, playing a monaural
program, or receiving a weak
FM broadcast (the sound qual-
ity might improve).
2. If you selected PRO LOGIC and
you connected the supplied front,
center, and rear speakers, then
repeatedly press
CENTER MODE
until the WIDE indicator lights.
If you selected PRO LOGIC and
you connected speakers other
than the ones supplied, repeat-
edly press
CENTER MODE
to
select one of the following operat-
ing modes:
NORMAL
:
Select this mode when
using a center speaker with lim-
ited low-frequency response. The
low-frequency sounds present at
the center of the screen are
routed equally to the front left and
right speakers. This creates the
illusion that the sound is coming
from the center.
WIDE
:
Select this mode when
using a full-range center speaker
that has good low-frequency
response. The low-frequency
sounds present at the center of
the screen are routed to the cen-
ter speaker.
PHANTOM
:
Select this mode when
not using a center speaker. The
sound present at the center of the
screen is routed equally to the left
and right front speakers. This cre-
ates the illusion that the sound is
coming from the center.
3. Press
TEST TONE
. The test tone
sounds from each speaker for
about 2 seconds. (If connected,
both surround speakers sound the
tone at the same time.)
4. Slowly turn
MASTER VOLUME
on
the system (or hold down
MASTER
VOL –
or
+
on the remote control)
until the test tone sounds at a
comfortable level.
5. Press
CENTER LEVEL –
or
+
on
the system (or
CENTER –
or
+
on
the remote control) until the vol-
ume level for the center speaker is
the same as the front speakers.
6. Press
SURROUND LEVEL
or
+
on the system (or
SURROUND
or
+
on the remote control) until the
volume level for the rear speakers
is the same as the front speakers.
7. Press
TEST TONE
to turn off the
test tone.
Note:
When Dolby Pro Logic is not on,
MASTER VOLUME
on the system (or
MASTER VOL
or
+
on the remote
control) affects only the sound level
from the front speakers. When using
stereo headphones, turn off Dolby
Surround.
13-1293.fm Page 18 Wednesday, July 14, 1999 6:49 PM