Filter
Top Products
26
After the CD changer checks all
disc trays, the display shows each
loaded CD’s disc number at the
bottom of the display surrounded
by a graphic.
To assign a category or subcategory
to a CD (see “Assigning Category and
Subcategory Names to Loaded CDs”
on Page 31).
SELECTING A CD
With play stopped, select the CD you
want to play or eject one of two ways.
• Repeatedly press
DISC SKIP
DOWN
or
UP
on the CD changer
(or
DISC SELECT
– or
+
on the
remote control) until the disc num-
ber appears.
• Press the appropriate
DISC
SELECT
key(s) on the CD changer
until the disc number appears.
For example, to select disc num-
ber 23, press
2/DEF
, then
3/GHI
.
(Precede single-digit numbers
with a
0
. For example, to select
disc number 3, press
0-/*
, then
3/
GHI
.)
Note:
If you select a number that
does not have a CD assigned to it,
NO
DISC
appears on the display.
REMOVING CDS
1. With play stopped, select the CD
you want to eject.
2. Press
DOOR OPEN
. The CD
changer’s door opens.
3. Press
LOAD/UNLOAD
inside the
CD changer’s door.
appears on the display, the plat-
form moves the selected CD to
the slot and the graphic around
the selected CD’s number disap-
pears.
4. After the platform stops, gently
remove the CD from the CD slot.
5. To remove more CDs, select the
CD then repeat Steps 3–4.
6. Close the door.
CHANGE
13-1293.fm Page 26 Wednesday, July 14, 1999 6:49 PM