Filter
Top Products
15
OPERATION
BASIC OPERATION
Cautions:
• The system automatically reduces
the volume the first time you turn it
on after you install it. To protect
your hearing after that, set the vol-
ume to its lowest level before you
turn it on.
• Do not set the system’s volume
too high while playing soft or quiet
portions of a music program. Due
to the system’s wide dynamic
range, the speakers might be
damaged if the music program
produces a sudden loud passage.
Follow these steps to operate your
system.
1. Press
POWER
to turn on the sys-
tem.
scrolls across the dis-
play, the STANDBY indicator turns
off, and the
CD
,
TAPE
,
TUNER
,
PHONO
, and
VIDEO
function but-
tons light.
Note:
The function selected when
the system was last turned off
lights red; all others light green.
2. Press
CD
,
TAPE
,
TUNER
,
PHONO
or
VIDEO
on the system to select
the desired audio source. The
selected source’s indicator lights
red.
3. If the source to be played is
encoded with Dolby Surround
Sound, select the desired Dolby
Surround Mode (see “Selecting
the Dolby Surround Mode” on
Page 17).
4. Start the source or tune to the
desired station.
POWER ON
13-1293.fm Page 15 Wednesday, July 14, 1999 6:49 PM