Filter
Top Products
HD-5MD/EN
70
Application
8. Put the unit in standby mode.
÷The standby/timer indicator lights green.
÷The SLEEP timer cannot be used when the
timer function is being used for playback.
÷When the time has not been set, the timer
function cannot be used.
÷The timer function will not operate when the
same time is set for the ON time and the OFF
time.
When the timer setting has been completed,
confirm that the power is off (standby).
Setting the PROG. timer again to the
same contents
Press the TIMER key on the remote control and
light "
1
", "
2
", or "
21
".
TIMER
Remote control unit only
When timer operation is not desired
While the power is on, press the TIMER key on
the remote control to extinguish "
".
TIMER
Remote control unit only
÷The PROG. contents set last will be executed.
÷Make the preparations for CD.
÷The PROG. contents will be kept as long as
no resetting is done.
÷ When the power fails or the plug of the power cable is disconnected from the receptacle during power off
(standby) after timer setting, the standby/timer indicator will flash green. In this case, repeat the time
setting.
÷ When the standby/timer indicator flashes green after completion of program timer recording, the recording
may not have been possible. In that case, set the time again.
Timer operation