Filter
Top Products
HD-5MD/EN
58
Application
MD Edit Functions
TRACK EDIT
A
1
B
2
C
3
D
4
E
5
F
6
G
7
A
1
B
2
C
3
D
4
F
5
G
6
L
R
30
10 5310(–dB)
MD
DIGITAL
L
R
30
10 5310(–dB)
MD
DIGITAL
4¢
P.CALL
SET
L
R
30
10 5310(–dB)
MD
DIGITAL
SET
Erasing individual tracks (ERASE)/Erasing all tracks on an MD (ALL ERASE)
While the unit is stopped, it is possible to erase all tracks or only a selected track. When one track is erased,
the track numbers of the tracks after it all will be reduced by one.
It is also possible to erase tracks registered in a group.
Image for eraseing a track
Perform the operation after the display of
"GROUP" and "PGM" has been extinguished.
Remote control unit only
1 Press the "TRACK EDIT" key.
2 Press the "SET" key.
3 Press the 4P.CALL¢ keys re-
peatedly to select "ERASE ?".
4 Press the "SET key.
÷When the editing is to be abandoned, press
the "TRACK EDIT" key to stop the editing and
to return to the original condition.
÷When an item which cannot be edited is se-
lected, an
will be shown at the beginning
of the display.
÷ MD edit mode is reached.
Return to the original status is made when no opera-
tion is performed within 20 seconds.
÷ When something else is being displayed, press the
4 P.CALL ¢ keys to switch, and then press the
"SET" key.
Continued on next page