Filter
Top Products
HD-5MD/EN
25
Basic
1 Select the tuner input.
2 Press the "ENTER" key for more than 2 sec-
onds
Collective presetting of stations
÷ A maximum of 40 stations of the band presently
being received will be preset.
÷ When there are many stations and the intended
station has not been preset, please also use
"One-by-one presetting (Manual preset)".
Remote control unit only
TUNER/BAND
ENTER
Receiving broadcast station
The space between radio channels has been set to the one that prevails in the area to which the system is shipped.
However, if the current channel space setting does not match the setting in the area where the system is to be
used, for instance when you move from area 1 or area 2 shown in the following table or vice versa, proper recep-
tion of AM/FM broadcasts cannot be expected. In this case, change the channel space setting in accordance with
your area by referring to the following table.
Channel space setting
1 Select the tuner input.
2 Press the "stop 7" key for more than 2sec-
onds.
÷ At FM 50 kHz, the corresponding AM frequency is
9 kHz.
At FM 100 kHz, the corresponding AM frequency
is 10 kHz.
Each press the "stop 7" key for more than 2 sec-
onds switches the modes as follows.
1 FM 50 k
2 FM 100 k
Main unit only
CHANNEL
Space Frequency
Area
1
2
USA, Canada and South
American countries
Other countries
FM: 100 kHz
AM: 10 kHz
FM: 50 kHz
AM: 9 kHz
FM
AUTO
MHz
STEREO
L
R
30
10 5310(–dB)
MD