Filter
Top Products
HD-5MD/EN
44
Application
Recording in changed order (PGM mode playback + O.T.E.)
1 Select the desired recording speed.w
2 Set a recordable minidisc. ¤
3 Set the disc(s) to the CD tray(s). 0
4 Bring the CD to stop status.
5 Program the tracks to be recorded. fl
6 Press the "O.T.E." key on the remote con-
trol unit.
O.T.E.
4 After completion of recording, press the 0
key to eject the minidisc.
(Main unit)
÷ Eject the minidisc after completion of the recording.
Always eject the minidisc after completion of
the recording.
It is possible to program the CD tracks and to
record this program to an MD. The tracks of three
CDs can be programmed and recorded to one MD.
Perform the operations of steps 1and 2 on page
42 to select normal speed or 4x speed.
Perform the steps 1 to 5 of "Listening to the de-
sired sequence (program playback)" on page 36
to program the tracks.
÷Recording will be done with the recording mode
and the recording speed set in advance.
Perform the operation of step 3 on page 33 to
change the recording speed.
÷Recording of the programmed CDs starts.
÷When either the CD playback or the MD recording
stops, the other operation also will stop.
÷When this unit changes the CD automatically ac-
cording to the program, the recording also is
paused automatically and no unnecessary record-
ing (parts without sound) is made.
÷When the possible recording time or the possible
number of tracks on the MD is exceeded, "DISC
FULL" will be displayed and the recording will
stop.
÷O.T.E. recording in combination with repeat play-
back is not possible.
Cancel PGM mode playback. Interrupting a recording
PGM mode can be canceled by the proce-
dure for "To clear the entire program".‡
When the STOP 7 key is pressed, the
playback and the recording are ended.