Filter
Top Products
HD-5MD/EN
35
Basic
Select the CD recording format and the recording
level.
(When the source is a CD)
When recording from a commercial CD to an MD,
select the recording format as "DIGITAL" (digital
recording), the default setting at the time of pur-
chase. However, when recording from CD to MD,
digital recording may not be possible because of
SCMS*. In such a case, switch the recording for-
mat to "ANALOG" (analog recording).
÷ For details, refer to "In regard to SCMS". d
1 Select "REC LEVEL ?" as follows.
1 Press the "menu" key.
2 Select "REC LEVEL ?" with
the "volume/multi control"
knob.
Return to the original status is
made when no operation is per-
formed within 20 seconds.
2 Press the "set" key.
2 Select "ANALOG" or "DIGITAL" with the
"volume/multi control" knob and press the
"set" key.
1 Select CD input
"MD REC MODE ?"
"GROUP MAKE ?"
"REC SPEED ?"
"REC LEVEL ?"
"DIMMER ?"
Adjust the recording level.
1 Play the input source to be recorded.
2 Press the MD rec key to enter recording
pause status. In recording pause status,
the recording level can be adjusted while
looking at the level indication.
3 Select "REC LEVEL ?" as follows.
1 Press the "menu" key.
2 Select "REC LEVEL ?" with
the "volume/multi control"
knob.
Return to the original status is
made when no operation is per-
formed within 20 seconds.
2 Press the "set" key.
2 Turn the volume/multi control knob to ad-
just the recording level and press the set
key.
Analog or digital recording is selected automati-
cally according to the input source.
Adjust so that the level indication does not
exceed "0" frequently.
"MD REC MODE ?"
"GROUP MAKE ?"
"REC SPEED ?"
"REC LEVEL ?"
"DIMMER ?"
L
R
30
10 5310(–dB)
MD
DIGITAL
1
L
R
30
10 5310(–dB)
MD
DIGITAL
Level
indication
Display example in case of
digital recording
Display example in case of
analog recording
÷ The analog recording level can be adjusted from -12
to 0. The initial setting is 0.
÷ The digital recording level can be adjusted from -6 to
+6. The initial setting is 0.
÷ At the time of CD 4x speed O.T.E. recording (w),
recording is done at the recording level "0" (standard
value), independent of the level set value.
Once recording has been completed, the re-
cording level returns to the initial set value ("0").