Kenwood HD-5MD Stereo System User Manual


 
HD-5MD/EN
33
Basic
3. Set the recording mode.
1 Select "BALANCE" as follows.
1 Press the "menu" key.
2 Select "MD REC MODE ?" with the "volume/multi control"
knob.
When the "volume/multi control " knob is turned, switching is done
as follows.
Return to the original status is made when no operation is per-
formed within 20 seconds.
2 Press the "set" key.
"MD REC MODE ?"
"GROUP MAKE ?"
"DIMMER ?"
2 Select the desired recording mode.
1 Select the desired recording mode with the volume/
multi control knob.
"STEREO" ......Stereo recording: Recording is possible for
the time shown on the MD cartridge.
"LP2" ..............Stereo 2x long-play recording: Recording is
possible for approximately double the time
shown on the MD cartridge.
"LP4" ..............Stereo 4x long-play recording: Recording is
possible for approximately four times the
time shown on the MD cartridge.
"MONO" ........ Monaural recording: Monaural recording is
possible for approximately double the time
shown on the MD cartridge.
2 Press the "set" key.
3 When LP2 or LP4 has been selected in step {2}, turn the
volume/multi control knob, select "ON" or "OFF" for
LP:STAMP, and press the set key.
"LP:STAMP ON" : "LP:" is inserted in front of the track title.
"LP:STAMP OFF": "LP:" is not inserted in front of the track title.
4. Start recording.
1 Press the MD rec key. (Recording pause status will be en-
tered.)
2 When the preparations have been completed, press the MD
rec key again. (Recording will start.)
÷ When the source is a CD, pressing the 6 key will start CD
playback and MD recording. (CD synchro-recording)
2 Start playback of the source (sound).
This step is not required in case of recording from a tuner or in case
of CD synchro-recording.
÷ When adjustment of the recording level is required, adjust while
the recording is paused.
1
2
3
or
(CD synchro-
nized recording)