Filter
Top Products
HD-5MD/EN
42
Application
Recording of all tracks or a single track of a CD by one-touch re-
cording (O.T.E.)
All tracks of a CD can be recorded by one-touch recording (normal speed, 4x speed)
(all tracks O.T.E.)
Main unit only
1 Select "REC SPEED ?" as follows.
1 Press the "menu" key.
2 Select "REC SPEED ?" with the "volume/
multi control" knob.
3 Press the "set" key.
2 Select the desired recording speed.
1 Select the desired recording speed
with the "volume/multi control" knob.
3 Press the "set" key.
3 Set a recordable minidisc. ¤
4 Set a disc into the CD tray. )
5 Enter CD stop status. )
6 Set the recording mode (STEREO, LP2,
LP4, or MONO).
Perform the operation of step 4 on page 33.
7 Press the "O.T.E." key on
the remote control unit.
8 After completion of recording, press the 0
key to eject the minidisc.
O.T.E.
(Main unit)
When the "volume/multi control " knob is turned, switching
is done as follows.
"MD REC MODE ?"
"GROUP MAKE ?"
"REC SPEED ?"
"DIMMER ?"
Return to the original status is made when no opera-
tion is performed within 20 seconds.
When the "volume/multi control " knob is turned, switching
is done as follows.
"CD > MD NORM"
: Recording with normal speed.
"CD > MD HIGH"
: Recording with 4 times of normal speed.
÷Recording will start from the first track of the CD,
and all tracks will be recorded.
÷When either the CD playback or the MD record-
ing stops, the other operation also will stop.
÷When the possible recording time or the possible
number of tracks on the MD is exceeded, "DISC
FULL" will be displayed and the recording will
stop.
÷Eject the minidisc after completion of the re-
cording.
Always eject the minidisc after completion of
the recording.