Filter
Top Products
1-12 Uninstalling the Software Programs
System does not recognize the CD-Writer Plus drive
■ In Windows 95, simply click on the Connect or Disconnect external
drive icon on your desktop.
Select Shuttle EPAT External ATAPI Adapter, then click Disconnect.
Restart your computer, or shut it down and then turn it on again.
Watch for the green light on the front of the CD-Writer Plus drive to
blink as the computer boots up
Select Shuttle EPAT External ATAPI Adapter, then click Connect.
■ Make sure the CD-Writer Plus drive’s cables are connected properly.
■ See “Check for a conflict with the parallel port (some other device using the
same IRQ or I/O as the parallel port).” on page 1-10. For example, a
sound board or fax/modem board may be using the same IRQ. If you
discover a conflict(s), change the setting on the other device. Refer to
the manuals that came with your computer and other devices for
instructions.
■ The power supply should have a steady green light when connected
at both ends. If it is flashing, try a different power outlet. If it is still
flashing the power supply could be damaged.
Uninstalling the Software Programs
You can remove all of CD-Writer Plus’s programs or individual programs.
CAUTION: If you want to reinstall the CD-Writer Plus drive’s software, first be
sure to uninstall the original software.
1. Click the Start button.
■ Point to Programs.
■ Point to HP CD-Writer Plus.
■ Point to Tools & Information.
■ Point to Utilities.
■ Click Uninstall.