HP (Hewlett-Packard) C4381-90100 CD Player User Manual


 
A-1
Appendix A: Technical
Specifications
Appendix A:
Technical Specifications
Minimum System Requirements
Your computer should meet or exceed these requirements:
IBM or compatible Pentium/75 Mhz processor or above
Microsoft
®
Windows 95
®
or Windows NT
®
4.0
NOTE: For Windows NT, Service Pack 3 is required.
16 MB RAM
Hard drive with at least 528 MB storage capacity (that is, with a
transfer rate of at least 800 kB/sec and disk access time of less than 20
msec)
110 MB free hard drive space for installing software
10 MB free hard drive space for each minute of music to be recorded
High-speed parallel port (EPP or ECP) set to:
- IRQ 7 and I/O address 378 or
- IRQ 5 and I/O address 278
In Windows 95, to check the configuration settings of your parallel
port:
- Right-click on the My Computer icon
- Select Properties
- Select the Device Manager tab
- Highlight Printer Port
- Click on the Properties button
- Select the Resources tab
- Look at the numbers listed for Input/Output Range (I/O)
and Interrupt Request (IRQ)
If the numbers need to be changed, see the documentation that came
with your computer.