Filter
Top Products
13258 11/01
71
From Remote From Front Panel Action
1
(PAUSE) or
(STOP)
(UP) or (DOWN) move to Control Out 4
2
SEL or ENTER
↵
(ENTER)
activate CONTROL OUT 4 SETUP
3
(PAUSE) or
(STOP)
(UP) or (DOWN) move to desired source
4
X
(REW) or
W
(FF)
VOLUME KNOB select desired control operation
5
repeat 3 - 4 repeat 3 – 4 set control out 4 for other sources
6
MENU
MENU
return to CONTROL OUT SETTINGS
7
MENU
MENU
return to ADVANCED SYSTEM SETUP
Security Options
Advanced Security options allow you to hide the ADVANCED SYSTEM SETUP menu to prevent inadvertent
changes to advanced system settings. This menu also allows you to lock your preset and system setup settings to
prevent inadvertent reprogramming.
Advanced Menu Visibility -
If you select Advanced Menu Visible then you can return to this menu directly by
entering MAIN MENU and selecting System Setup and then Advanced (refer to SETUP). Advanced Systems
Settings will appear as line 6 in SETUP MENUS. Make sure your processor is on and the remote is in B&K mode.
From Remote From Front Panel Action
1
Function not available
from remote
SLEEP, (UP) and
.(DOWN)
simultaneously
enable advanced features
2
(PAUSE) or
(STOP)
(UP) or (DOWN) move to Advanced Menu
3
X
(REW) or
W
(FF)
VOLUME KNOB set to Hidden (recommended) or Visible
Memory Locked -
Locking memory will prevent changing of your presets or system settings.
ADVANCED SYSTEM SETUP
1 Zone 1 Setup 'A'
2 Zone 2 Setup 'B'
3 Power On Titles
4 Control Out
5 Security Options
6 DSP Usage
7 RS-232 Control Port
next item SEL select
MENU setup system
5 Security Options
SECURITY OPTIONS
1 Advanced Menu Visible
2 Memory Locked No
3 Front Locked No
4 IR Locked No
next item SEL select
MENU advanced setup
1 Advanced Menu Visible
SECURITY OPTIONS
1 Advanced Menu Visible
2 Memory Locked No
3 Front Locked No
4 IR Locked No
next item SEL select
MENU advanced setup
2 Memory Locked No