Filter
Top Products
13258 11/01
47
CHOOSING A SOURCE
In general, the selected source will appear at the Zone 1 (A) output, the TAPE output, and the V1 output. To
prevent feedback, TAPE input will not appear at TAPE output and V1 input will not appear at V1 output.
From Remote From Front Panel Action
desired source
(press twice)
(SOURCE) step to source select desired source - remote now controls source
B&K
return control to processor if desired
Note: if your source has separate ON and OFF control like your processor, pressing the source button twice will
also turn on that source. If not, you will have to hit POWER while the remote is still set to the desired source.
TAPE MONITOR -
If you have an analog three-head cassette or reel-to-reel analog tape recorder you may wish
to use TAPE MONITOR, which allows you to hear exactly what is on the tape as you are recording.
From Remote From Front Panel Action
desired source
(press twice)
(SOURCE) step to source select desired source or TUNER
source will appear on TAPE and V1 outs
wait a few seconds while processor analyze
s
selected source
TAPE
(press twice)
(SOURCE) step quickly to TAPE select TAPE monitor
TAPE will appear on Zone 1 (A) out
Note: The tape monitor loop only allows recording of analog inputs. If you simply choose the source you wish to
tape without
then selecting TAPE MONITOR then you can make analog recordings of digital inputs as well as
analog inputs.
AM/FM TUNER
TUNER
Stereo 7 EQ Variable
FM 102.5 2.0 96k Both Video
From Remote
From Front Panel
Action
1
B&K
make sure remote is in B&K mode
2
AM or FM (SOURCE) step to AM or FM
select desired TUNER Band
3
TUNE+ or TUNE- (UP) or (DOWN) manually tune up or down to desired frequency
see AM/FM TUNER SETTING for DIRECT /
SEEK / TUNE
4
SEL or ENTER
↵
(ENTER)
set FM stereo/mono
Note: For a few seconds after performing any tuner operation ( AM, FM, or TUNE+/-) you may directly enter a
frequency from the remote control’s numeric keypad. The MONO or ST audio mode buttons on the remote control
and select mono/stereo.
DVD
Surround 7 EQ Variable
DVD 5.1 48k Both Video
TAPE
Stereo 7 EQ Variable
Analog 2.0 96k Both Video