Filter
Top Products
13258 11/01
44
Use volume with presets -
Recalling a preset normally recalls the entire system settings that were present
when the preset was saved. However, you may wish to recall presets with the current volume setting, rather than
the volume setting when the preset was saved. If so, then set Volume in Presets to No
.
From Remote From Front Panel Action
1
X
(REW) or
W
(FF)
VOLUME KNOB select Yes or No
Generating a name when saving a preset -
When you save a preset, your system automatically generates a
simple name for the preset, which you can then change before confirming the preset save. You may wish to
defeat this automatic naming so that any custom names that you have entered will not get erased each time you
save a minor change to a preset. Turning auto naming off means that the name that is already present in the
preset will be re-used when you save a new preset to that location. If you turn off auto naming you must be very
careful to always enter an appropriate name. Otherwise you can end up with a preset that is named DVD, but
actually recalls the V1 input, or is named FM 96.9 but actually recalls AM 1520!
From Remote From Front Panel Action
1
X
(REW) or
W
(FF)
VOLUME KNOB select Auto or Manual
2
MENU
↵
MENU
return to SETUP SYSTEM
SETUP PRESETS
1 Volume In Presets Yes
When recalling a preset
volume level changes to
preset level
2 Preset Names Auto
When saving a preset
system generates a name
next item adjust
MENU setup system
1 Volume In Presets Yes
SETUP PRESETS
1 Volume In Presets No
When recalling a preset
volume level remains at
current level
2 Preset Names Auto
When saving a preset
system generates a name
next item adjust
MENU setup system
1 Volume In Presets No
SETUP PRESETS
1 Volume In Presets Yes
When recalling a preset
volume level changes to
preset level
2 Preset Names Auto
When saving a preset
system generates a name
next item adjust
MENU setup system