Filter
Top Products
STB & PVR Function
63
3) Set timer
To set a timer for a future program, perform the appropriate procedure
as follows;
For EPG Action = “Change Svc”, place the cursor on your desired
program and use the following functions;
To set a recording timer: Press the REC button. The program will
now be shaded red.
To set a viewing timer: Press the PLAY button. The program will
now be shaded blue.
To delete an existing timer: Press the STOP button. The program
will now return to the normal grey shading.
For EPG Action = “Set Timer”, place the cursor on your desired
program. Press
OK
to set a recording timer. The program will now
be shaded red. A second press of the
OK
button will set a viewing
timer, and the program will now be shaded blue. A third press of the
OK
button will delete the timer and return the program to the normal
grey shading.
NOTE
When EPG Action = “Set Timer”, the
REC
,
PLAY
and
STOP
buttons
can still be used to set and delete timers.
Timers set via the EPG are created with a recurrence setting of “Once”.
You must edit the timer if you wish to change the recurrence e.g. for a
weekly timer.
4) Edit timer
To edit an existing timer, place your cursor on your desired timer and
perform the appropriate procedure as follows;
To edit a recording timer, press the
REC
button.
To edit a view timer, press the
PLAY
button.
This will open the “Edit Timer” window. You can now make your
desired changes to the timer (see “Edit Timer” section earlier in this
chapter).
NOTE
You can create and edit a timer quickly by pressing the
REC
button
twice for a recording timer or the
PLAY
button twice for a view timer.
If a program is only partially covered by a timer, it is shaded in pink
for a recording timer or pale blue for a view timer.