Filter
Top Products
STB & PVR Function
41
1-3.
Volume Level Adjust
Use the
VOL+/VOL-
buttons respectively to increase or decrease the
level of the analogue and the digital audio outputs. The
MUTE
button
will turn off both the analogue and digital audio outputs. You can
cancel the mute function by pressing the
MUTE
button a second time,
or by pressing either of the
VOL+/VOL-
buttons.
NOTE
If you have set the audio format to “passthrough” (see “Audio
Outputs” section in Chapter 4), you cannot control the volume level of
the digital audio outputs set to AC3 or Dolby Digital 5.1 audio. In
these cases, you must use the remote control of your audio decoder
(e.g. amplifier) to adjust the volume level.
1-4.
Soundtrack Change
If the current TV program provides more than one language or audio
format (e.g. MPEG audio and Dolby audio together), you can change the
setting while you continue to watch the program. Press the
SOUNDTRACK
button to show a list of the languages and audio
formats available. Use the
UP/DOWN
buttons to select your desired
setting and then press
OK
to change it. To hide the list, press the
SOUNDTRACK
button a second time, or press
EXIT
.