Beyonwiz FV-L1 Home Theater System User Manual


 
Introduction
9
4-2.
Operating TV set
The enclosed remote control can also be used to control a TV set
provided by major TV manufacturers. In order to operate a TV with the
enclosed remote control, please select
TV
mode by pressing the
TV
button. The red backlight beneath the
TV
button lights when you press
a button in this mode.
There are two ways to program the remote control to work with your TV,
automatic code search or manual set.
1) Automatic Code Search
Turn on your TV then press and hold the
TV
button until the red-
backlight turns on. Point the remote control at your TV and then click
the
UP
button. After the red-backlight of the
TV
button blinks, wait at
least 3 seconds to check if your TV turns off or not. If your TV turns off
automatically, the remote control is ready to use with your TV. If your
TV does not turns off, repeat clicking the
UP
button until your TV turns
off. Once your TV turns off when you click the
UP
button, press the
OK
button. The
TV
button blinks three times to indicate that the
remote control is set.
2) Manual Set
You can set your remote control with 3-digit code manually. Check the
following table and find the brand of your TV.
Turn on your TV then press and hold the
TV
button until the red-
backlight turns on. Point the remote control at your TV and enter the
3-digit code with the
NUMERIC
buttons. Wait until the red-backlight
blanks three times. If your TV turns off automatically, your remote
control is ready to use with your TV. If your TV does not turns off,
press the
TV
button and enter another code from the table under that
brand.
FUJITSU 208 223 224 218 253
261 286 307 325 329
410 422 423
HITACHI 206 207 208 215 218
229 231 232 236 238
240 244 253 256 286
287 292 298 299 300
301 304 305 306 307
309 3123 314 315 316
317 325 358 367 381
382 383 384 399 405
406 407 410 411